销售日本SMC标准气缸，VFS5000-S-04

    销售日本SMC标准气缸，VFS5000-S-04

    企业QQ：2880626087

    电话；021-69001039

    手机；17321017802（微信）

    邮箱；17321017802@163.com

    联系人；周彩云

    地址：上海市嘉定区江桥嘉涌路99弄6号713室

    将自动开关安装到自动开关安装槽中，大致设置为

    自动开关的安装位置。

    handle one-touch fittings.

    q Fit an auto switch into the auto

    switch mounting groove to set it roughly to the

    mounting position for an auto switch.

    w After reconfirming the detecting position,

    tighten the auto switch mounting screw  to

    (applicable tubing O.D.  3.2 to  6), refer to

    Best Pneumatics No. 6.

    Refer to the Fittings and Tubing Precautions

    (Best Pneumatics No. 6) for how to

    w重新确认检测位置后，拧紧汽车开关安装螺丝*

    保护自动开关。

    e检测位置的修改应在q的条件下进行。

    secure the auto switch.

    e Modification of the detecting position

    should be made in the condition of q.

    When tightening an auto switch mounting screw,

    use a watchmaker’s screwdriver with a handle of

    approximately 5 to 6 mm in diameter.

    (Use a tightening torque of approximately 0.10 to 0.20 N·m.)

    *拧紧汽车开关安装螺丝时，请使用带手柄的制表机螺丝刀

    直径约5至6mm。

    （使用约0.10 0.20N·m的紧固扭矩）

    For details about one-touch fittings,

    miniature fittings and speed controllers (applicable

    tubing O.D.  2 only), refer to the

    catalog ES50-25 (B edition or later).

    Also, for details about speed controllers

    销售日本SMC标准气缸，VFS5000-S-04