VICKERS美国卧式动力单元出售，威格士动力单元结构原理

VICKERS美国卧式动力单元出售，威格士动力单元结构原理

  上海乾拓贸易有限公司 

　企业QQ：2880626087

　电话；021-69001039

　手机；17321017802（微信）

　邮箱；17321017802@163.com

　地址：上海市嘉定区江桥嘉涌路99弄6号713室

 Ensure that the relief valve setting does not exceed the pressure rating of the unit 

过热组件会造成灼伤，泄漏和组件过早失效的可能。

温度计•用于定制应用的可选配件的长列表•可选的卡特勒锤式电机起动器...易于安装

免费送货至美国各地...大部分单位的五天交货我们提供技术服务，

根据您的具体要求定制单位;从基本功率单元到定制设计系统。

Piston, Vane  &  Gear pumps, Pressures to 4,250 psi

Contact your Eaton Representative for more Information at 517-789-7220 or Fax us at 517-789-1715. www.eatonhydraulics.com

Standard Features • Continuous-duty Rated Electric Motors… for Durability and Long Life

 • Aeroquip   Hose & Fittings… Leak Free Design • Lift-off Tops… for Easy Maintenance 

• Close-coupled Pump & Motor… for Easy Service and Reliability 

• Standard Relief Valve, and Pressure Level / Temperature Gauges… for System Protection 

• Long List of Optional Accessories… for Custom Applications • Optional Cutler-Hammer   Motor Starters… for Ease of Installation

Free Delivery Anywhere in the Contiguous USA… Five-Day Delivery on Most Units

Now, More Choices In Vickers  Power Unit Offerings. Whatever the Industry…Whatever the Application.

Standard Power Units

System Overhead

标准特点•连续功率额定电机...耐久性和长寿命•空气软管和配件•无泄漏设计•提升顶部•易于维护

•紧密耦合的泵和电机，便于维护和性•标准泄压阀，以及用于系统保护的压力水平仪

 and means of motor disconnection to avoid electric shock and fire hazards. 

2. Avoid the potential for oil spills and slippery floor conditions by: • Maintaining oil reservoir on a level surface 

• Maintaining leak-free hydraulic hose or pipe connections to the unit • Not overfilling the unit with hydraulic fluid. 

3. Exceeding the recommended operating temperatures may cause system components to become too hot to handle. 

Overheated components create a potential for burns, leaks, and premature component failure.

or of the lowest rated component connected to the power unit.  The system pressure setting 

should be within the horsepower specifications of the unit’s electric motor.  Use the formula HP = PSI 

* GPM * 0.00073 for a general guideline. Refer to tables on Page 9 for specific operation limitations.

 5. Ensure all pressure is released from the system before attempting to remove or repair any valve,

 pump, or component of the system. Failure to follow this procedure

 may result in the release of pressurized hydraulic fluid that has the potential to cause severe personal injury. 

6. Ensure that all electrical power is disconnected at the junction box before attempting removal 

or repair of any electric motor starter, valves, or pumps, or other components in the system.

1.根据国家电气规范（NEC）和职业安全与健康法（OSHA）进行所有电气连接，分析电路保护和电机断开装置，以避免触电和火灾。

 2.通过以下方式避免漏油和滑溜的情况：•将油箱保持在水平面上•维护无泄漏的液压软管或管道连接到本机

•不要用液压油过量填充设备。过TJ的工作温度可能会导致系统组件变得太热而无法处理。

 We offer technical services to customize units for your specific requirements; from basic power units to custom-engineered systems.

Read General Safety Information carefully before attempting to assemble, install, 

operate, or maintain these products. Failure to comply with these 

instructions may result in personal injury and/or property damage. Retain these instructions for future reference.

1. Make all electrical connections in accordance with the National Electrical Code (NEC) 

and Occupational Safety and Health Act (OSHA) regarding branch circuit protection

4.确保安全阀设置不过设备的额定压力或与功率单元连接的较额定分量。系统压力设置应在本机电动马达的功率规格范围内。

使用公式HP = PSI * GPM * 0.00073作为一般准则。 5.在尝试卸下或修理系统的任何阀门，泵或组件之前，

确保所有压力从系统中释放。不遵守此程序可能导致释放可能导致严重人身伤害的加压液压油。 

6.在拆卸或修理任何电动起动器，阀门或泵或系统中的其他部件之前，确保接线盒上的所有电源都断开连接

VICKERS美国卧式动力单元出售，威格士动力单元结构原理