日本SMC真空节流破坏阀技术指导

日本SMC真空节流破坏阀技术指导   

上海乾拓贸易有限公司 

联系人：杨江玲

企业QQ：2880626083

手 机：18917074297（微信）

电 话：021-39529830-8012

邮箱；18917074297@163.com

地址：上海市嘉定区江桥嘉涌路6号楼713室

特长：

可以与4通电磁阀SJ2000/SJ3000混合使用。

能够用1个阀来控制真空吸着和破坏。

阀宽10mm(与SJ3000系列相同)。

内置有2个滑阀。

真空侧与破坏侧内置多种可交换的过滤器。

带有能够调节空气流量的节流阀。

技术参数；

24 VDC, 12 VDC ±10% of rated voltage∗ 0.4 0.15 Diode LED

Restrictor operation

 3 Non-locking push type Push-turn locking slotted type Manual 

Slotted locking type External pilot/Pilot valve individual 

exhaust Not required Unrestricted 150/30 Dustproof

Coil rated voltage Allowable voltage fluctuation Power consumption (W)

Manual override (Manual operation)

Release pressure port 1(P) Vacuum pressure port 3/5(E) Pilot X port

With power saving circuit (Continuous duty type)

 Surge voltage suppressor Indicator type Standard 

3 position 3 port valve with restrictor Air 0.25 to 0.7 

Valve construction Fluid

Pilot method Lubrication Mounting orientation 

Impact/Vibration resistance (m/s2) Note 3) Enclosure

Ambient and fluid temperature (°C) Max. operating frequency (Hz)

Operating pressure range (MPa)

–100 kPa to 0.7 Note 1) 0.25 to 0.7 Note 2) –10 to 50 (No freezing)

使用说明：

where letters A and B can be seen. [Manual override switch release status 

(refer to the figure below)] Operation with the manual override switch in a locked 

After manual override operation, lock the manual switch for use 

(when the manual override of the push-turn locking slotted type is locked, 

a manual override switch cannot be locked). 

For manual override operation, move the manual override switch to a position 

status can cause damage to the manual override and air leakage, 

so be sure to release the manual override switch before use. 

产品图片：

日本SMC真空节流破坏阀技术指导